FTM
Moderator: MOD_nyhetsgrupper
-
CWatters
Re: FTM
"Patscga" <patscga@aol.com> wrote in message
news:20041120132246.23255.00000889@mb-m03.aol.com...
Which version of FTM are you running? I think this may be a reasonably
recent addition.
If you have more than about 50 people in the database it gets tricky for the
program to layout everyone on the page. The result can be very messy
sometimes. Personally I prefer Genbox Family Tree for printing a "Tree of
everyone" - it allows you to move the boxes around on the page to tidy it
up. Perhasp FTM can do this now?
news:20041120132246.23255.00000889@mb-m03.aol.com...
I have nieces and nephews who would like to like to see ALL the people to
whom
they are related and I don't know how to do that with FTM. When I print
out a
genealogy report, it lists only those from whom they are directly
descended.
Any suggestions would be appreciated.
Which version of FTM are you running? I think this may be a reasonably
recent addition.
If you have more than about 50 people in the database it gets tricky for the
program to layout everyone on the page. The result can be very messy
sometimes. Personally I prefer Genbox Family Tree for printing a "Tree of
everyone" - it allows you to move the boxes around on the page to tidy it
up. Perhasp FTM can do this now?
-
Bill Burgoyne
Re: FTM
Click on the persons name in family view, then "View" on the drop down click
on Kinship report. all relatives and in-laws will be displayed.
Click on "File" then "Print Kinship"
Bill Burgoyne
Website :- http://freepages.genealogy.rootsweb.com/~billburgoyne/
All outgoing mail checked by Norton 2004 anti-virus
"CWatters" <colin.watters@pandoraBOX.be> wrote in message
news:hAMnd.30512$j77.1507459@phobos.telenet-ops.be...
on Kinship report. all relatives and in-laws will be displayed.
Click on "File" then "Print Kinship"
Bill Burgoyne
Website :- http://freepages.genealogy.rootsweb.com/~billburgoyne/
All outgoing mail checked by Norton 2004 anti-virus
"CWatters" <colin.watters@pandoraBOX.be> wrote in message
news:hAMnd.30512$j77.1507459@phobos.telenet-ops.be...
"Patscga" <patscga@aol.com> wrote in message
news:20041120132246.23255.00000889@mb-m03.aol.com...
I have nieces and nephews who would like to like to see ALL the people to
whom
they are related and I don't know how to do that with FTM. When I print
out a
genealogy report, it lists only those from whom they are directly
descended.
Any suggestions would be appreciated.
Which version of FTM are you running? I think this may be a reasonably
recent addition.
If you have more than about 50 people in the database it gets tricky for
the
program to layout everyone on the page. The result can be very messy
sometimes. Personally I prefer Genbox Family Tree for printing a "Tree of
everyone" - it allows you to move the boxes around on the page to tidy it
up. Perhasp FTM can do this now?
-
Nick Spalding
Re: FTM
CWatters wrote, in <hAMnd.30512$j77.1507459@phobos.telenet-ops.be>:
Version 6 (1999) and later have the All-in-One tree.
No.
--
Nick Spalding
"Patscga" <patscga@aol.com> wrote in message
news:20041120132246.23255.00000889@mb-m03.aol.com...
I have nieces and nephews who would like to like to see ALL the people to
whom
they are related and I don't know how to do that with FTM. When I print
out a
genealogy report, it lists only those from whom they are directly
descended.
Any suggestions would be appreciated.
Which version of FTM are you running? I think this may be a reasonably
recent addition.
Version 6 (1999) and later have the All-in-One tree.
If you have more than about 50 people in the database it gets tricky for the
program to layout everyone on the page. The result can be very messy
sometimes. Personally I prefer Genbox Family Tree for printing a "Tree of
everyone" - it allows you to move the boxes around on the page to tidy it
up. Perhasp FTM can do this now?
No.
--
Nick Spalding
-
Patscga
Re: FTM
Click on the persons name in family view, then "View" on the drop down click
on Kinship report. all relatives and in-laws will be displayed.
Click on "File" then "Print Kinship"
What I would really love to see is a "genealogy report" (not kinship report)
that displays all the people to whom this person is related. I wonder if any
software has that capability.
Pat
-
James A. Doemer
Re: FTM
CWatters <colin.watters@pandoraBOX.be> wrote:
I have FTM v.11 and you can move the boxes to where you want them.
"Patscga" <patscga@aol.com> wrote in message
news:20041120132246.23255.00000889@mb-m03.aol.com...
I have nieces and nephews who would like to like to see ALL the
people to whom they are related and I don't know how to do that with
FTM. When I print out a genealogy report, it lists only those from
whom they are directly descended. Any suggestions would be
appreciated.
Which version of FTM are you running? I think this may be a reasonably
recent addition.
If you have more than about 50 people in the database it gets tricky
for the program to layout everyone on the page. The result can be
very messy sometimes. Personally I prefer Genbox Family Tree for
printing a "Tree of everyone" - it allows you to move the boxes
around on the page to tidy it up. Perhasp FTM can do this now?
I have FTM v.11 and you can move the boxes to where you want them.
-
CWatters
Re: FTM
"James A. Doemer" <jdjunkmail@earthlink.net> wrote in message
news:DiQnd.7238$pK6.670@newsread2.news.atl.earthlink.net...
I was thinking of upgrading my copy of FTM. Can I ask...
Say you spend an hour moving boxes around to make a nice tree. What happens
when you add a person to the database? Do you have to repeat all that work
or does it allow you to add the new person to the existing tree?
news:DiQnd.7238$pK6.670@newsread2.news.atl.earthlink.net...
I have FTM v.11 and you can move the boxes to where you want them.
I was thinking of upgrading my copy of FTM. Can I ask...
Say you spend an hour moving boxes around to make a nice tree. What happens
when you add a person to the database? Do you have to repeat all that work
or does it allow you to add the new person to the existing tree?
-
James A. Doemer
Re: FTM
"CWatters" <colin.watters@pandoraBOX.be> wrote in message
news:zd9od.31648$P63.1543288@phobos.telenet-ops.be...
No, you can save the view you edited and the new person will arrange itself
the way the program directs it to, but the other boxes you moved previously
will stay where you put them.
news:zd9od.31648$P63.1543288@phobos.telenet-ops.be...
"James A. Doemer" <jdjunkmail@earthlink.net> wrote in message
news:DiQnd.7238$pK6.670@newsread2.news.atl.earthlink.net...
I have FTM v.11 and you can move the boxes to where you want them.
I was thinking of upgrading my copy of FTM. Can I ask...
Say you spend an hour moving boxes around to make a nice tree. What
happens
when you add a person to the database? Do you have to repeat all that work
or does it allow you to add the new person to the existing tree?
No, you can save the view you edited and the new person will arrange itself
the way the program directs it to, but the other boxes you moved previously
will stay where you put them.
-
CLV3
Re: FTM
"Patscga" <patscga@aol.com> wrote in message
news:20041120132246.23255.00000889@mb-m03.aol.com...
Have you tried the kinship report?
news:20041120132246.23255.00000889@mb-m03.aol.com...
I have nieces and nephews who would like to like to see ALL the people to
whom
they are related and I don't know how to do that with FTM. When I print
out a
genealogy report, it lists only those from whom they are directly
descended.
Any suggestions would be appreciated.
Pat
Have you tried the kinship report?
-
CLV3
Re: FTM
"Patscga" <patscga@aol.com> wrote in message
news:20041120162840.23218.00001050@mb-m03.aol.com...
Thats what a kinship report is. Shows everyone in the file who is related to
the primary person and how.
news:20041120162840.23218.00001050@mb-m03.aol.com...
Click on the persons name in family view, then "View" on the drop down
click
on Kinship report. all relatives and in-laws will be displayed.
Click on "File" then "Print Kinship"
What I would really love to see is a "genealogy report" (not kinship
report)
that displays all the people to whom this person is related. I wonder if
any
software has that capability.
Pat
Thats what a kinship report is. Shows everyone in the file who is related to
the primary person and how.
-
CWatters
Re: FTM
"James A. Doemer" <jdjunkmail@earthlink.net> wrote in message
news:1P9od.9097$Qh3.2633@newsread3.news.atl.earthlink.net...
Thats great thanks,
news:1P9od.9097$Qh3.2633@newsread3.news.atl.earthlink.net...
No, you can save the view you edited and the new person will arrange
itself
the way the program directs it to, but the other boxes you moved
previously
will stay where you put them.
Thats great thanks,